Loading... Please wait...

Iridium GO! Firmware Upgrades

Iridium has released Iridium GO! firmware version 1.5.2 that provides the following updates:

  • Improvement in the communication speed over an internet connection
  • Addition of UTC time with the periodic tracking message
  • Support for a new GPS chip in the GO! devices with hardware version #4B or greater

To update the firmware on your device please perform the following actions:

1. Download the firmware file by clicking on this LINK.

2. Unzip the downloaded firmware file to your Desktop.

3. Power on the Iridium GO! by flipping up the antenna.

4. Wait for the device to fully boot.

5. From your computer (must be a computer and not an iPad, iPhone, MAC PC or Android phone) join the Iridium GO! Wi-Fi network. Example Iridium GO! SSID: IRIDIUM-02473.

6. Open a web browser and type in the following IP address into the address bar: 192.168.0.1.

7. An Iridium interface page will open.

8. Type in "guest" for the "User Name" and "Password" fields.


If you prefer to send your device to ClientSAT to be updated please contact us. A small charge to cover our time & return shipping will apply


NOTE: The screenshots below will reference an older version of firmware. Please ignore the version number. The steps are still accurate.

 

 ug1.png

9. From the main page, click on the "System" tab.

 

 ug2.png

 

 

10. Click on the "Choose File" button.

 ug3.png

 

11. Select the previously unzipped firmware file. The file name should be called "IridiumGO_Portal_upgrade_1_5_2.frm"

12. Once the file has been selected, click on the "Upgrade" button.

 

ug4.png 

13. The progress bar will start to count up to 100%. The upgrade will take up to 15 minutes to complete.

 ug5.png

 

14. Once the firmware update reaches 100% the Iridium GO! will reboot. The device will be ready to use again. 

ug6.png 

 

Our Newsletter